{"title":"Old Masters Stain","description":"\u003cp\u003e\u003cspan\u003eOld Masters is recognized for its comprehensive wood stains and finishes.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"natural-tint-base-gel-stain-by-old-masters-80108","title":"Natural Tint Base Gel Stain Pint by Old Masters 80108","description":"\u003ch2\u003eOld Masters Natural Tint Base Gel Stain Pint 80108\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":48791948460317,"sku":"5780108","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/PaintSundriesSolutionsInc_086348801080xxd16035.jpg?v=1720734861"},{"product_id":"red-mahogany-gel-stain-pint-by-old-masters-80408","title":"Red Mahogany Gel Stain Pint by Old Masters 80408","description":"\u003ch2\u003eOld Masters Red Mahogany Gel Stain Pint 80408\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665086026013,"sku":"80408","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/red_mahogany_gel_stain_old_masters.jpg?v=1764293849"},{"product_id":"dark-walnut-gel-stain-pint-by-old-masters-80708","title":"Dark Walnut Gel Stain Pint by Old Masters 80708","description":"\u003ch2\u003eOld Masters Dark Walnut Gel Stain Pint 80708\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665117876509,"sku":"80708","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Dark_Walnut_Pint_old_masters.jpg?v=1764294126"},{"product_id":"early-american-gel-stain-pint-by-old-masters-80408","title":"Early American Gel Stain Pint by Old Masters 80608","description":"\u003ch2\u003eOld Masters Early American Gel Stain Pint 80608\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665119711517,"sku":"80608","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/early_american_gel_stain_old_masters.jpg?v=1764294256"},{"product_id":"weathered-wood-gel-stain-pint-by-old-masters-82008","title":"Weathered Wood Gel Stain Pint by Old Masters 82008","description":"\u003ch2\u003eOld Masters Weathered Wood Gel Stain Pint 82008\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665122431261,"sku":"82008","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/weathered_wood_gel_stain_old_masters.jpg?v=1764294628"},{"product_id":"espresso-gel-stain-pint-by-old-masters-84408","title":"Espresso Gel Stain Pint by Old Masters 84408","description":"\u003ch2\u003eOld Masters Espresso Gel Stain Pint 84408\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665124823325,"sku":"84408","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/espresso_gel_stain_old_masters.jpg?v=1764294722"},{"product_id":"american-walnut-gel-stain-pint-by-old-masters-81808","title":"American Walnut Gel Stain Pint by Old Masters 81808","description":"\u003ch2\u003eOld Masters American Walnut Gel Stain Pint 81808\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665127674141,"sku":"81808","price":20.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/American_walnut_gel_stain_old_masters.jpg?v=1764294909"},{"product_id":"espresso-gel-stain-quart-by-old-masters-84404","title":"Espresso Gel Stain Quart by Old Masters 84404","description":"\u003ch2\u003eOld Masters Espresso Gel Stain Quart 84404\u003c\/h2\u003e\n\u003ch4\u003eWhy Stain?\u003c\/h4\u003e\n\u003cp\u003eOld Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:\u003c\/p\u003e\n\u003cp\u003e-Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces.\u003cbr\u003e-Change existing colors on previously finished surfaces\u003cbr\u003e-Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass.\u003c\/p\u003e\n\u003ch4\u003eWhere to Use\u003c\/h4\u003e\n\u003cp\u003eGel Stain is specifically formulated for use on nonporous surfaces such as fiberglass, primed metal, and composition surfaces and is also suitable for wood applications. Especially recommended for woods such as pine, birch, maple, poplar, and cherry. Excellent for vertical surfaces. For outdoor use when topcoated with a protective exterior clear finish.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStain application varies based on surface material. Please see application instructions below.\u003c\/p\u003e\n\u003cp\u003eApplication on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.\u003c\/p\u003e\n\u003cp\u003eApplication on Fiberglass \u0026amp; Composition Surfaces: Stain one section or panel at a time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eApplication over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes. Realistic woodgrain patterns can be created by using the Old Masters Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.\u003c\/p\u003e\n\u003cp\u003eApplication over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to remove excess stain.\u003c\/p\u003e\n\u003cp\u003eIf applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.\u003c\/p\u003e\n\u003ch4\u003eMixing and Tinting\u003c\/h4\u003e\n\u003cp\u003eCustom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon. The amount of colorant added may affect its performance and extend dry time. To lighten Gel Stain, mix any proportion with Natural Gel Stain. Stir for uniform consistency. DO NOT THIN.\u003c\/p\u003e\n\u003ch4\u003eTinting\u003c\/h4\u003e\n\u003cp\u003eApproximately 1,000 to 1,200 square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately 800 to 1,600 square feet per gallon. If the surface is porous, coverage is approximately 300 to 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003ch4\u003eDrying Time\u003c\/h4\u003e\n\u003cp\u003eApproximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface. For additional color depth, a second coat of stain can be applied after 8 hours. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003cbr\u003e**   Due to the nature and depth of color for the stain color Carbon Black, the minimum dry time is 24 hours.  Dry time may also be extended due to excess stain application or lack of stain penetration.\u003c\/p\u003e\n\u003ch4\u003eCleanup\u003c\/h4\u003e\n\u003cp\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003ch4\u003eRecommended Finish Coat\u003c\/h4\u003e\n\u003cp\u003eWe recommend Old Masters clear finishes. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. For exterior use, we suggest Old Masters Ascend Exterior® or Old Masters Spar-Marine Varnish. When applying water-based finishes, allow a minimum of 24 hours before top coating.\u003c\/p\u003e\n\u003cp\u003eMAX VOC: 550 grams\/liter (4.6 lbs\/gal)\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665129738525,"sku":"84404","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Espresso_gel_stain_quart_old_masters.jpg?v=1764295205"},{"product_id":"ascend-exterior-water-based-clear-finish-by-old-masters-71301","title":"Ascend Exterior Water Based Satin Clear Finish Gallon by Old Masters 71101","description":"\u003ch2\u003eOld Masters Ascend Exterior Water Based Satin Clear Finish 71101\u003c\/h2\u003e\n\u003cp\u003eOld Masters Ascend Exterior Water-Based Clear Finish is a premium solution for protecting and beautifying exterior surfaces.\u003c\/p\u003e\n\u003cp\u003e*Designed for wood, fiberglass, coated metal, and painted surfaces, this durable coating provides exceptional resistance to water and weather, making it perfect for outdoor use. Its advanced UV absorbers shield against sun damage, preventing fading and discoloration while maintaining the natural beauty of the surface.\u003c\/p\u003e\n\u003cp\u003e*Ideal for railings, outdoor furniture, doors, and marine surfaces above the waterline, it also offers added ultraviolet protection for interior windowsills and door frames.\u003c\/p\u003e\n\u003cp\u003eThis versatile finish dries to the touch in just 30 minutes under optimal conditions and cleans easily with soap and water, making it as convenient as it is effective. Whether you’re enhancing outdoor furniture or protecting doors from the elements, Ascend Exterior delivers professional-grade results that stand the test of time.\u003c\/p\u003e\n\u003cp\u003eNote: Not recommended for wooden decks, steps, fences, log homes, or below-waterline surfaces.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable water-based clear finish for exterior wood, fiberglass, coated metal, or painted surfaces\u003c\/li\u003e\n\u003cli\u003eAdvanced UV protection prevents fading and discoloration from sun exposure\u003c\/li\u003e\n\u003cli\u003eResists water and weather for long-lasting durability in outdoor environments\u003c\/li\u003e\n\u003cli\u003eIdeal for railings, outdoor furniture, above-waterline marine surfaces, and doors\u003c\/li\u003e\n\u003cli\u003eCan also be used on interior windowsills and door frames for added UV protection\u003c\/li\u003e\n\u003cli\u003eQuick-drying formula touches dry in approximately 30 minutes\u003c\/li\u003e\n\u003cli\u003eEasy to clean with soap and water for hassle-free maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665135997213,"sku":"71101","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Ascend_Exterior_topcoat_Satin_gallon_977fef2c-4cae-4117-a42f-29a86d5e439e.jpg?v=1764296167"},{"product_id":"ascend-exterior-water-based-gloss-clear-finish-gallon-by-old-masters-71301","title":"Ascend Exterior Water Based Gloss Clear Finish Gallon by Old Masters 71301","description":"\u003ch2\u003eOld Masters Ascend Exterior Water Based Gloss Clear Finish 71301\u003c\/h2\u003e\n\u003cp\u003eOld Masters Ascend Exterior Water-Based Clear Finish is a premium solution for protecting and beautifying exterior surfaces.\u003c\/p\u003e\n\u003cp\u003e*Designed for wood, fiberglass, coated metal, and painted surfaces, this durable coating provides exceptional resistance to water and weather, making it perfect for outdoor use. Its advanced UV absorbers shield against sun damage, preventing fading and discoloration while maintaining the natural beauty of the surface.\u003c\/p\u003e\n\u003cp\u003e*Ideal for railings, outdoor furniture, doors, and marine surfaces above the waterline, it also offers added ultraviolet protection for interior windowsills and door frames.\u003c\/p\u003e\n\u003cp\u003eThis versatile finish dries to the touch in just 30 minutes under optimal conditions and cleans easily with soap and water, making it as convenient as it is effective. Whether you’re enhancing outdoor furniture or protecting doors from the elements, Ascend Exterior delivers professional-grade results that stand the test of time.\u003c\/p\u003e\n\u003cp\u003eNote: Not recommended for wooden decks, steps, fences, log homes, or below-waterline surfaces.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable water-based clear finish for exterior wood, fiberglass, coated metal, or painted surfaces\u003c\/li\u003e\n\u003cli\u003eAdvanced UV protection prevents fading and discoloration from sun exposure\u003c\/li\u003e\n\u003cli\u003eResists water and weather for long-lasting durability in outdoor environments\u003c\/li\u003e\n\u003cli\u003eIdeal for railings, outdoor furniture, above-waterline marine surfaces, and doors\u003c\/li\u003e\n\u003cli\u003eCan also be used on interior windowsills and door frames for added UV protection\u003c\/li\u003e\n\u003cli\u003eQuick-drying formula touches dry in approximately 30 minutes\u003c\/li\u003e\n\u003cli\u003eEasy to clean with soap and water for hassle-free maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665141076253,"sku":"71301","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Ascend_Exterior_topcoat_Gloss_gallon_f56c80e5-3cbc-496d-8412-80b9faee39fc.jpg?v=1764296134"},{"product_id":"natural-wood-stain-quart-by-old-masters-76104","title":"Natural Wood Stain Quart by Old Masters 76104","description":"\u003ch2\u003eOld Masters Natural Wood Stain Quart 76104\u003c\/h2\u003e\n\u003cp\u003eFree of pigment, Natural allows wood to embrace its roots. Simple and pure, this tone highlights a wood's true beauty by gracefully brightening woodgrain. On oak, Natural emboldens the wood's red undertones. A versatile design element, this color can be used in combination with many other shades of stain to create an array of decorating styles. Clean and humble, Natural enhances any color palette or wood species with ease.\u003c\/p\u003e\n\u003cp\u003e32oz quart\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665194946845,"sku":"76104","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/natural_wood_stain_quart_old_masters_05994559-4d45-4ce5-b9a5-cae051edef75.webp?v=1764300539"},{"product_id":"red-mahogany-wiping-stain-quart-by-old-masters-11404","title":"Red Mahogany Wiping Stain Quart by Old Masters 11404","description":"\u003ch2\u003eOld Masters Red Mahogany Wiping Stain Quart 11404\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665227845917,"sku":"11404","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/red_mahogany_wiping_stain_old_masters_1_03f532a9-5172-4502-a010-9b571ef4cabe.jpg?v=1764302000"},{"product_id":"natural-wiping-stain-quart-by-old-masters-11116","title":"Natural Wiping Stain Quart by Old Masters 11116","description":"\u003ch2\u003eOld Masters Natural Wiping Stain Quart 11116\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50665233875229,"sku":"11116","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/natural_wiping_stain_dc309cfb-cca0-4d16-a584-35cf0f38d9a9.jpg?v=1764302315"},{"product_id":"dark-walnut-wiping-stain-quart-by-old-masters-11804","title":"Dark Walnut Wiping Stain Quart by Old Masters 11804","description":"\u003ch2\u003eOld Masters Dark Walnut Wiping Stain Quart 11804\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666828792093,"sku":"11804","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/dark-walnut-wiping-qt.webp?v=1782178992"},{"product_id":"espresso-wiping-stain-quart-by-old-masters-15201","title":"Espresso Wiping Stain Quart by Old Masters 15204","description":"\u003ch2\u003eOld Masters Espresso Wiping Stain Quart 15204\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666830102813,"sku":"15204","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/espreso_wiping_stain_old_matsters_quart.jpg?v=1764319846"},{"product_id":"spanish-oak-wiping-stain-quart-by-old-masters-12201","title":"Spanish Oak Wiping Stain Quart by Old Masters 12201","description":"\u003ch2\u003eOld Masters Spanish Oak Wiping Stain Quart 12201\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666833477917,"sku":"12201","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/spanish-oak-wiping-qt.webp?v=1782178652"},{"product_id":"pickling-white-wiping-stain-quart-by-old-masters-12404","title":"Pickling White Wiping Stain Quart by Old Masters 12404","description":"\u003ch2\u003eOld Masters Pickling White Wiping Stain Quart 12404\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666836263197,"sku":"12404","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/pickling-white-wiping-qt_d80fb68c-c6de-48b7-9046-73487b93d5f2.avif?v=1782178825"},{"product_id":"pecan-wiping-stain-quart-by-old-masters-12904","title":"Pecan Wiping Stain Quart by Old Masters 12904","description":"\u003ch2\u003eOld Masters Pecan Wiping Stain Quart 12904\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666849468701,"sku":"12904","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/pecan_wiping_stain_old_masters.jpg?v=1764320765"},{"product_id":"rich-mahogany-wiping-stain-quart-by-old-masters-15004","title":"Rich Mahogany Wiping Stain Quart by Old Masters 15004","description":"\u003ch2\u003eOld Masters Rich Mahogany Wiping Stain Quart 15004\u003c\/h2\u003e\n\u003cdiv class=\"list\"\u003e\n\u003cp\u003eTransform your projects with this cutting-edge, robust interior oil-based wiping stain. Its thick, rich formula ensures effortless application and exceptional color control, delivering a deep, uniform finish on most surfaces in just one coat. Ideal for a wide range of applications, this versatile stain works beautifully on unfinished wood, previously finished surfaces, fiberglass, metal, and composite materials. Specifically recommended for fine woods like pine, birch, maple, poplar, and cherry, it offers professional-level results with minimal effort, making it the perfect choice for achieving stunning, high-quality finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-edge, robust interior oil-based wiping stain\u003c\/li\u003e\n\u003cli\u003eThick, rich formula ensures easy application and superior color control\u003c\/li\u003e\n\u003cli\u003eAchieve rich, uniform color on most surfaces in a single coat\u003c\/li\u003e\n\u003cli\u003eSuitable for unfinished wood, previously finished surfaces, fiberglass, metal, and composites\u003c\/li\u003e\n\u003cli\u003eEspecially recommended for pine, birch, maple, poplar, and cherry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":50666851598621,"sku":"15004","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Rich_Mahogany_wiping_stain_old_masters.jpg?v=1764320872"},{"product_id":"satin-spar-marine-varnish-exterior-oil-based-topcoat-by-old-masters","title":"Satin Spar-Marine Varnish Exterior Oil Based Topcoat by Old Masters","description":"\u003cp\u003eOld Masters Spar-Marine Varnish, Clear Finish Topcoat, Oil Based Outdoor topcoat, flexible finish to withstand water and weather, UV ray topcoat\u003c\/p\u003e\n\u003cp\u003eThis is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. It also contains ultraviolet absorbers for advanced sun protection. Available in satin, semi-gloss and gloss sheens.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eSpar-Marine Varnish is recommended for use on exterior wood, fiberglass, coated metal, or painted surfaces. It can be used on unfinished wood surfaces or previously finished surfaces. This finish can also be used over stained surfaces that have thoroughly dried.\u003c\/p\u003e\n\u003cp\u003eIdeal for use on exterior surfaces, such as fences, railings, lawn furniture, doors, boats, and marine surfaces. For interior use on windowsills and door frames for added ultraviolet protection. DO NOT USE on wooden decks or steps, wood siding, log homes, or wood boats below the water line.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eAll surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected.\u003c\/p\u003e\n\u003cp\u003eBare Wood: Sand surface thoroughly with medium grit sandpaper and progress to fine grit sandpaper. Always sand in the direction of the wood grain. Remove dust with a tack rag.\u003c\/p\u003e\n\u003cp\u003ePreviously Finished Surfaces: Surface should be sanded to remove imperfections and gloss, using extra fine sandpaper (220 grit) and, sanding with the grain. Remove dust with a tack rag.\u003c\/p\u003e\n\u003cp\u003eStained Surfaces: Stain must be thoroughly dry before applying clear finish. Do not sand uncoated stained surface.\u003c\/p\u003e\n\u003cp\u003eNote: If a sealer is desired, we recommend Old Masters Penetrating Sealer.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir thoroughly before and during application. DO NOT SHAKE. Do not apply in direct sunlight or areas of extreme air movement.\u003c\/p\u003e\n\u003cp\u003eApply with pure bristle or polyester brush, flat pad, or spray.\u003cbr\u003eApply in full, even coats. Flow on with minimum brushing to achieve a glass-like finish.\u003cbr\u003eSpar-Marine Varnish will dry to touch in 4 to 6 hours. Under ideal drying conditions, allow 8 to 16 hours before recoating. Overnight drying is recommended.\u003cbr\u003eSand lightly between coats with fine sandpaper (220 grit) to produce a finer finish and promote adhesion. If sandpaper gums up, allow more dry time. Remove sanding dust.\u003cbr\u003eReapply. For exterior surfaces, a minimum of three coats should be applied.\u003cbr\u003eMaintenance\u003cbr\u003eAs with all exterior clear finishes, this product will not offer unlimited protection against the elements. Surfaces which receive direct sunlight may have to be re-coated annually to maintain gloss and to prevent cracking and peeling.\u003c\/p\u003e\n\u003cp\u003eThinning\u003cbr\u003eDo not thin. Use as packaged.\u003c\/p\u003e\n\u003cp\u003eCoverage\u003cbr\u003eApproximately 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time\u003cbr\u003eApply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Spar-Marine Varnish will dry to touch in 6 to 8 hours. Under ideal drying conditions, allow 8 to 16 hours before recoating. Overnight drying is recommended. Drying time will be affected by temperature, humidity, and film thickness. Protect product from freezing prior to and during application.\u003c\/p\u003e\n\u003cp\u003eWait 24 hours before subjecting surfaces to light use. Care should be used during the first week after application as the finish is curing to its ultimate hardness.\u003c\/p\u003e\n\u003cp\u003eCleanup\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup.  The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003cbr\u003eMAX VOC: 350 grams\/liter (2.9 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Quart","offer_id":51918878179613,"sku":null,"price":38.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":51918878212381,"sku":null,"price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/spar-marinesatinqt.avif?v=1782182896"},{"product_id":"gloss-spar-marine-varnish-exterior-oil-based-topcoat-by-old-masters","title":"Gloss Spar-Marine Varnish Exterior Oil Based Topcoat by Old Masters","description":"\u003cp\u003eOld Masters Spar-Marine Varnish, Clear Finish Topcoat, Oil Based Outdoor topcoat, flexible finish to withstand water and weather, UV ray topcoat\u003c\/p\u003e\n\u003cp\u003eThis is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. It also contains ultraviolet absorbers for advanced sun protection. Available in satin, semi-gloss and gloss sheens.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eSpar-Marine Varnish is recommended for use on exterior wood, fiberglass, coated metal, or painted surfaces. It can be used on unfinished wood surfaces or previously finished surfaces. This finish can also be used over stained surfaces that have thoroughly dried.\u003c\/p\u003e\n\u003cp\u003eIdeal for use on exterior surfaces, such as fences, railings, lawn furniture, doors, boats, and marine surfaces. For interior use on windowsills and door frames for added ultraviolet protection. DO NOT USE on wooden decks or steps, wood siding, log homes, or wood boats below the water line.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eAll surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected.\u003c\/p\u003e\n\u003cp\u003eBare Wood: Sand surface thoroughly with medium grit sandpaper and progress to fine grit sandpaper. Always sand in the direction of the wood grain. Remove dust with a tack rag.\u003c\/p\u003e\n\u003cp\u003ePreviously Finished Surfaces: Surface should be sanded to remove imperfections and gloss, using extra fine sandpaper (220 grit) and, sanding with the grain. Remove dust with a tack rag.\u003c\/p\u003e\n\u003cp\u003eStained Surfaces: Stain must be thoroughly dry before applying clear finish. Do not sand uncoated stained surface.\u003c\/p\u003e\n\u003cp\u003eNote: If a sealer is desired, we recommend Old Masters Penetrating Sealer.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir thoroughly before and during application. DO NOT SHAKE. Do not apply in direct sunlight or areas of extreme air movement.\u003c\/p\u003e\n\u003cp\u003eApply with pure bristle or polyester brush, flat pad, or spray.\u003cbr\u003eApply in full, even coats. Flow on with minimum brushing to achieve a glass-like finish.\u003cbr\u003eSpar-Marine Varnish will dry to touch in 4 to 6 hours. Under ideal drying conditions, allow 8 to 16 hours before recoating. Overnight drying is recommended.\u003cbr\u003eSand lightly between coats with fine sandpaper (220 grit) to produce a finer finish and promote adhesion. If sandpaper gums up, allow more dry time. Remove sanding dust.\u003cbr\u003eReapply. For exterior surfaces, a minimum of three coats should be applied.\u003cbr\u003eMaintenance\u003cbr\u003eAs with all exterior clear finishes, this product will not offer unlimited protection against the elements. Surfaces which receive direct sunlight may have to be re-coated annually to maintain gloss and to prevent cracking and peeling.\u003c\/p\u003e\n\u003cp\u003eThinning\u003cbr\u003eDo not thin. Use as packaged.\u003c\/p\u003e\n\u003cp\u003eCoverage\u003cbr\u003eApproximately 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time\u003cbr\u003eApply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Spar-Marine Varnish will dry to touch in 6 to 8 hours. Under ideal drying conditions, allow 8 to 16 hours before recoating. Overnight drying is recommended. Drying time will be affected by temperature, humidity, and film thickness. Protect product from freezing prior to and during application.\u003c\/p\u003e\n\u003cp\u003eWait 24 hours before subjecting surfaces to light use. Care should be used during the first week after application as the finish is curing to its ultimate hardness.\u003c\/p\u003e\n\u003cp\u003eCleanup\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup.  The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003cbr\u003eMAX VOC: 350 grams\/liter (2.9 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Quart","offer_id":51918878540061,"sku":null,"price":36.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":51918878572829,"sku":null,"price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/sparmarineglossquart.webp?v=1782183156"},{"product_id":"natural-fast-dry-stain-quart-by-old-masters","title":"Natural Fast Dry Stain Quart 60104 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eNatural Tint Base 60104\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918884438301,"sku":"60104","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/Natural-fast-dry-stainqt.webp?v=1782184314"},{"product_id":"early-american-fast-dry-stain-quart-by-old-masters","title":"Early American Fast Dry Stain Quart 60704 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eEarly American 60704\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918886142237,"sku":"60704","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/EarlyAmericanFastDryQt.webp?v=1782184835"},{"product_id":"dark-walnut-fast-dry-stain-quart-61004-by-old-masters","title":"Dark Walnut Fast Dry Stain Quart 61004 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eDark Walnut 61004\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918887747869,"sku":"61004","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/fastdrydarkwalnutqt.webp?v=1782184978"},{"product_id":"espresso-fast-dry-stain-quart-62304-by-old-masters","title":"Espresso Fast Dry Stain Quart 62304 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eEspresso  62304\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918888042781,"sku":"62304","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/espressofastdryquart.webp?v=1782185104"},{"product_id":"spanish-oak-fast-dry-stain-quart-61204-by-old-masters","title":"Spanish Oak Fast Dry Stain Quart 61204 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eSpanish Oak 61204\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918894727453,"sku":"61204","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/spanishoakfastdrystain.webp?v=1782185312"},{"product_id":"american-walnut-fast-dry-stain-quart-61804-by-old-masters","title":"American Walnut Fast Dry Stain Quart 61804 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eAmerican Walnut 61804\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918894989597,"sku":"61804","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/americanwalnutfastdryqt.webp?v=1782185404"},{"product_id":"golden-oak-fast-dry-stain-quart-60204-by-old-masters","title":"Golden Oak Fast Dry Stain Quart 60204 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003eGolden Oak 60204\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918895415581,"sku":"60204","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/goldenoakfastdryqt.webp?v=1782185559"},{"product_id":"pickling-white-fast-dry-stain-quart-61404-by-old-masters","title":"Pickling White Fast Dry Stain Quart 61404 by Old Masters","description":"\u003cp\u003eOld Masters Fast Dry Oil Based Stain\u003c\/p\u003e\n\u003cp\u003ePickling White 61404\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003eDesigned for craftsmen, this fast drying, high quality interior oil-based stain applies easily and enhances the wood’s natural grain with its intensified depth of color and clarity.\u003c\/p\u003e\n\u003cp\u003eFast Dry Stain is recommended for use on interior wood surfaces or surfaces on which the previous finish has been removed. This stain is preferred for hardwoods, such as oak, ash, walnut, and mahogany.\u003c\/p\u003e\n\u003cp\u003eWhere to Use\u003cbr\u003eExperience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork.\u003c\/p\u003e\n\u003cp\u003eSurface Preparation\u003cbr\u003eThe wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.\u003c\/p\u003e\n\u003cp\u003eApplication\u003cbr\u003eStir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat.\u003c\/p\u003e\n\u003cp\u003eTechnical Information\u003c\/p\u003e\n\u003cp\u003eMixing and Tinting:\u003cbr\u003eAchieve custom colors by intermixing Fast Dry Wood Stain colors or by adding up to 10 ounces of universal or industrial colorant per gallon to any Fast Dry Wood Stain or by adding colorant to Natural\/Tint Base Fast Dry Wood Stain. Natural\/Tint Base Fast Dry Wood Stain may be used to lighten a Fast Dry Wood Stain color in any proportion or as a tint base to which colorant may be added for ultimate color selection. The amount of colorant added may affect performance and extend dry time.\u003c\/p\u003e\n\u003cp\u003eCoverage:\u003cbr\u003eApproximately 500 square feet per gallon. Spreading rate will vary significantly depending on application method and condition of wood.\u003c\/p\u003e\n\u003cp\u003eDrying Time:\u003cbr\u003eOil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.\u003c\/p\u003e\n\u003cp\u003eCleanup:\u003cbr\u003eUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.\u003c\/p\u003e\n\u003cp\u003eDANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.\u003c\/p\u003e\n\u003cp\u003eRecommended Finish Coat:\u003cbr\u003eWe recommend Old Masters clear finishes. However, Fast Dry Wood Stain can be top coated with virtually any finish, including professional finishes such as lacquers and conversion varnishes. Wait 24 hours before top coating with a water-based clear finish.\u003c\/p\u003e\n\u003cp\u003eEPA VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e\n\u003cp\u003eActual VOC: 550 g\/L (4.5 lbs\/gal)\u003c\/p\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918895710493,"sku":"61404","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/picklingwhitefastdryqt.webp?v=1782185652"},{"product_id":"gloss-poly-urethane-interior-oil-based-topcoat-132735-by-old-masters","title":"Gloss Poly-Urethane Interior Oil Based Topcoat 49404 by Old Masters","description":"\u003cp\u003eOld Masters Gloss Poly-Urethane Interior Oil Based Topcoat 49404 by Old Masters\u003c\/p\u003e\n\u003cp\u003eSheen: Gloss \u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Masters Interior Oil‐Based Polyurethane is a self‐leveling, clear finish designed to protect the beauty of interior surfaces. Easy application and quick drying, this polyurethane will provide lasting, durable protection from abrasion, marring, chipping, alcohol and water. Great for use on interior wood surfaces such as floors, bars, counters, tabletops, cabinets, wood paneling and doors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918916059421,"sku":"49404","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/poly-urethaneglossqt.webp?v=1782186250"},{"product_id":"satin-poly-urethane-interior-oil-based-topcoat-49604-by-old-masters","title":"Satin Poly-Urethane Interior Oil Based Topcoat 49604 by Old Masters","description":"\u003cp\u003eOld Masters Satin Poly-Urethane Interior Oil Based Topcoat \u003cspan\u003e49604 \u003c\/span\u003eby Old Masters\u003c\/p\u003e\n\u003cp\u003eSheen: Satin \u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Masters Interior Oil‐Based Polyurethane is a self‐leveling, clear finish designed to protect the beauty of interior surfaces. Easy application and quick drying, this polyurethane will provide lasting, durable protection from abrasion, marring, chipping, alcohol and water. Great for use on interior wood surfaces such as floors, bars, counters, tabletops, cabinets, wood paneling and doors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918927692061,"sku":"49604","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/poly-urethanesatinqt.webp?v=1782186473"},{"product_id":"semi-gloss-poly-urethane-interior-oil-based-topcoat-49504-by-old-masters","title":"Semi-Gloss Poly-Urethane Interior Oil Based Topcoat 49504 by Old Masters","description":"\u003cp\u003eOld Masters Satin Poly-Urethane Interior Oil Based Topcoat \u003cspan\u003e49504 \u003c\/span\u003eby Old Masters\u003c\/p\u003e\n\u003cp\u003eSheen: Semi-Gloss\u003c\/p\u003e\n\u003cp\u003eSize: Quart\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOld Masters Interior Oil‐Based Polyurethane is a self‐leveling, clear finish designed to protect the beauty of interior surfaces. Easy application and quick drying, this polyurethane will provide lasting, durable protection from abrasion, marring, chipping, alcohol and water. Great for use on interior wood surfaces such as floors, bars, counters, tabletops, cabinets, wood paneling and doors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Old Masters","offers":[{"title":"Default Title","offer_id":51918933360925,"sku":"49504","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/files\/poly-urethanesemi-glossqt.webp?v=1782186585"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9772\/5030\/collections\/Old-Masters-Product-Group.png?v=1782178223","url":"https:\/\/allpaintproducts.com\/collections\/old-masters-stain.oembed","provider":"All Paint Products","version":"1.0","type":"link"}