Floral Alphabet Letters Silicone Mold by Zuri Designs

DIMENSIONS:  Each letter is 2" (5.1cm) tall. The frame is 5.43" (13.8cm) tall. 

Letters are separated by the following letters:
A, B, and Frame
C, D, E, F
G, H, I, J
K, L, M,N
O, P, Q, R
S, T, U, V
W, X, Y, Z
*If you buy the full set, we will ship you all 7 individual molds

Gorgeous molds with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. They can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Work well with candle and soap making mediums. Each mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free. Each mold is made of 100% food grade approved silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer. For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out. Zuri Designs molds are meticulously crafted from the finest silicone available, guaranteeing exceptional durability that transforms them into cherished crafting heirlooms. With proper care, they will serve you reliably for years to come. Please be aware that we cannot accept responsibility for damage caused by excessive bending, pulling, use of non-silicone-friendly mediums, or any other misuse.

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is as versatile — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Baroque Appliques Silicone Mold by Zuri Designs

Casting Sizes:

Left element size: W: 1.82" (4.63cm) H: 5.5" (13.96cm)

Top row large element on the right side: W: 5.77" (14.66cm) H: 2.48" (6.3cm)

Bottom row large element on the right side: W: 5.66" (14.39cm) H: 3.18" (8.1cm)

Small floral elements vary in size between 0.66" (1.7cm) to 1.57"(4cm) in width

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is as versatile — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Bohemian Lovers Silicone Mold by Zuri Designs

Casting size: W: 5.51" (14cm) H: 5" (12.7cm) D: 0.31" (0.8cm)

Set your creativity spinning with the Bohemian Lovers mold — an exquisitely detailed depiction of two free-spirited dancers in motion, hair streaming, skirt swirling, and every fold of fabric alive with movement. They radiate grace, wild energy, and intricate texture, making them the perfect centerpiece for projects that call for drama, elegance, and a touch of wanderlust.

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is as versatile — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Rocco Elegance Silicone Mold by Zuri Designs

Largest element size: W: 6" (15.26cm) H: 3.1" (7.89cm)

Top row elements (each): W: 3" (7.64cm) H: 1.72" (4.38cm)

Second row elements (each): W: 3" (7.64cm) H: 1.75" (4.45cm)

Central element: W: 3.53" (8.98cm) H: 1.72" (4.37cm)

Small elements (each) bottom corners: W: 0.9" (2.27cm) H: 1" (2.54cm)

Larger elements on bottom row (each): W: 3" (7.6cm) H: 1.52" (3.87cm) 

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is as versatile — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Bohemian Dancer 2 Silicone Mold by Zuri Designs

Casting size: W: 5.51" (14cm) H: 5" (12.7cm) D: 0.31" (0.8cm)

Set your creativity spinning with the Bohemian Dancer Set 2 mold — an exquisitely detailed depiction of a free-spirited dancer in motion, hair streaming, skirt swirling, and every fold of fabric alive with movement. She radiates grace, wild energy, and intricate texture, making her the perfect centerpiece for projects that call for drama, elegance, and a touch of wanderlust.

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is versatile — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Mold Size: 5.9" High; 7.2" Wide and 0.44" Deep

Large ornaments approx. 5 inches tall.

This mold is part of our Christmas Collection 2025.

Made from premium, food-grade silicone, this mold is:

Oven safe up to 464°F (240°C)
Freezer safe down to -104°F (-75°C)
Microwave safe
BPA, PVC, and Phthalate free

It works beautifully with resin, polymer clay, air-dry clay, hot glue, thermoplastic, modeling paste (ideal for shallower designs), wax, soap base, crafting concrete, and more.

Important Note: If you plan to use this mold for edible creations such as fondant, chocolate, or candy, do not reuse it after casting with resin, clay, or other non-edible mediums.

How to Use

Apply a fine layer of release agent when needed. Fill the mold with your chosen medium and allow to cure. To remove the casting, gently bend the mold edges—avoid forceful pulling. If removal is difficult, freeze the mold for 30 minutes to make castings pop out cleanly.

Why Zuri

Our molds are meticulously crafted from the highest-quality silicone to ensure heirloom durability and artistic precision. With proper care, your Zuri mold will serve you beautifully for years to come.

Mold Size: 5.31" High; 10.23" Wide; 0.4" Deep
Elves approx. 4.5 inches tall.

This mold is part of our Christmas Collection 2025.

Made from premium, food-grade silicone, this mold is:

Oven safe up to 464°F (240°C)
Freezer safe down to -104°F (-75°C)
Microwave safe
BPA, PVC, and Phthalate free

It works beautifully with resin, polymer clay, air-dry clay, hot glue, thermoplastic, modeling paste (ideal for shallower designs), wax, soap base, crafting concrete, and more.

Important Note: If you plan to use this mold for edible creations such as fondant, chocolate, or candy, do not reuse it after casting with resin, clay, or other non-edible mediums.

How to Use

Apply a fine layer of release agent when needed. Fill the mold with your chosen medium and allow to cure. To remove the casting, gently bend the mold edges—avoid forceful pulling. If removal is difficult, freeze the mold for 30 minutes to make castings pop out cleanly.

Why Zuri

Our molds are meticulously crafted from the highest-quality silicone to ensure heirloom durability and artistic precision. With proper care, your Zuri mold will serve you beautifully for years to come.

Mold size:
5.43" High; 7.87" wide and 0.36" deep

Gingerbread Man approx. 4.5 inches (10.2cm) tall.

This mold is part of our Christmas Collection 2025.

Made from premium, food-grade silicone, this mold is:

Oven safe up to 464°F (240°C)
Freezer safe down to -104°F (-75°C)
Microwave safe
BPA, PVC, and Phthalate free

It works beautifully with resin, polymer clay, air-dry clay, hot glue, thermoplastic, modeling paste (ideal for shallower designs), wax, soap base, crafting concrete, and more.

Important Note: If you plan to use this mold for edible creations such as fondant, chocolate, or candy, do not reuse it after casting with resin, clay, or other non-edible mediums.

How to Use

Apply a fine layer of release agent when needed. Fill the mold with your chosen medium and allow to cure. To remove the casting, gently bend the mold edges—avoid forceful pulling. If removal is difficult, freeze the mold for 30 minutes to make castings pop out cleanly.

Why Zuri

Our molds are meticulously crafted from the highest-quality silicone to ensure heirloom durability and artistic precision. With proper care, your Zuri mold will serve you beautifully for years to come.

Serenity of the Fae Silicone Mold by Zuri Designs

Casting size: W:14.8cm (5.82”) x H:14cm (5.51”) x D:0.8cm (0.31”)

Bring a touch of enchantment to your creations with the Serenity of the Fae mold — a breathtakingly detailed Baroque-style fairy swinging between ornate rose-covered columns. Perfect for when your craft project needs a dash of whimsy, a sprinkle of romance, and just enough floral drama to make your neighbors jealous.

This mold is ideal for:

• Mixed media art

• Greeting cards

• Furniture decorating

• Wall plaques

• Scrapbooking

• Home decor & more!

Craft it your way — our mold works beautifully with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). Feeling adventurous in the kitchen? It’s also food-safe, BPA, PVC, and phthalate free, making it perfect for candy, cookies, cake toppers, or even fairy-themed ice cubes (because why not?).

Key Features:

• Made from 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), and microwave safe

• Works with both edible and non-edible mediums

• Exceptional durability for years of creative fun

• Stunning, intricate detail worthy of a centerpiece mold

How to Use:
Apply a thin layer of release agent if needed, fill with your chosen medium, and allow it to cure. Bend the mold gently to release your casting — no brute fairy force required. If a casting is clingy, pop the mold into the freezer for 30 minutes and it will slide right out.

Zuri Designs molds are made to last, becoming treasured tools in your creative journey. With proper care, this fairy will keep swinging through countless projects.

Warning: We’re not responsible for damage from excessive bending, pulling, or using non-silicone-friendly materials — treat your mold kindly, and it will love you forever.

Raven Garden Silicone Mold Zuri Designs

Casting size:

• Left raven: W:9.38 cm (3.69”) × H:10.2 cm (4.02”) × D:0.78 cm (0.31”)

• Right raven: W:10.91 cm (4.30”) × H:10.2 cm (4.02”) × D:0.78 cm (0.31”)

Channel the mystique of nature’s most intelligent bird with the Raven Garden mold set — two exquisitely detailed ravens, each perched among lush, intricately sculpted florals and foliage. Whether you’re crafting something mysterious, majestic, or a little bit gothic, these ravens are ready to swoop straight into your next masterpiece.

Perfect for:

• Mixed media art

• Wall plaques

• Gothic & nature-inspired home décor

• Jewelry & wearable art

• Furniture accents

• Scrapbooking & cardmaking projects

Compatible with a wide range of mediums including polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). Feeling culinary? These molds are BPA, PVC, and phthalate free, made from 100% food-grade silicone perfect for edible creations like cake decorations, cookies, fondant details, or even eerie ice cubes for Halloween parties.

Key Features:

• Two unique raven-and-floral designs in one mold

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Exceptional detail capture for stunning results

• Works with edible and non-edible mediums

• Durable, flexible, and made to last for years of creative adventures

How to Use:
Lightly apply a release agent if needed, fill with your chosen medium, and allow to cure. To release, gently bend the edges of the mold — no talon strength required. If a piece clings on, freeze for 30 minutes and it will pop out effortlessly.

Zuri Designs molds are crafted to be more than just tools — they’re collectible works of art in themselves. With proper care, your Raven Garden mold will remain a loyal companion through countless creative flights.

Note: We’re not responsible for damage from excessive bending, pulling, or using incompatible materials. Treat your ravens kindly, and they’ll never fly away.

Bohemian Dancer Silicone Mold by Zuri Designs

Casting size: W:12 cm (4.72”) × H:12.7 cm (5.00”) × D:0.8 cm (0.31”)

Set your creativity spinning with the Bohemian Dancer mold — an exquisitely detailed depiction of a free-spirited dancer in motion, hair streaming, skirt swirling, and every fold of fabric alive with movement. She radiates grace, wild energy, and intricate texture, making her the perfect centerpiece for projects that call for drama, elegance, and a touch of wanderlust.

Ideal for:

• Mixed media art

• Statement wall plaques

• Furniture embellishments

• Home decor

• Greeting cards and scrapbooking

• Jewelry or wearable art with bold flair

This mold is as versatile as the dancer herself — compatible with polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, and modeling paste (best for shallow molds). And since she’s made from 100% food-grade silicone, she can also adorn cakes, cookies, and chocolates with edible artistry.

Key Features:

• Striking bohemian dancer design with exceptional texture and flow

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Works beautifully with edible and non-edible mediums

• Durable, flexible, and built for years of creative use

How to Use:
Apply a release agent if necessary, fill with your chosen medium, and let it cure. Gently bend the mold to release — no pirouettes required. For clingy castings, pop the mold in the freezer for 30 minutes for an effortless release.

Zuri Designs molds are crafted to inspire and endure. With proper care, the Bohemian Dancer will keep twirling her way through your artistic journey for years to come.

Note: Avoid excessive bending, pulling, or using incompatible materials to keep your mold in perfect form.

Baroque Griffins Set 1 Zuri silicone mold

Casting size (each griffin): W: 9.5 cm (3.74”) × H: 10.2 cm (4.02”) × D: 0.78 cm (0.31”)

Unleash the power and majesty of ancient legends with the Baroque Griffins Set 1 mold — two mirrored, exquisitely detailed griffins with curling manes, powerful wings, and intricate baroque flourishes. Perfect for when your project needs to say “yes, I am magnificent and I could guard a royal treasure”.

These mythical creatures bring commanding presence to:

• Mixed media art

• Furniture and architectural embellishments

• Wall plaques

• Fantasy and medieval décor

• Scrapbooking and greeting cards

• Jewelry and wearable art for the bold

Craft with confidence in polymer clay, air-dry clay, resin, hot glue, thermoplastic, crafting concrete, or modeling paste (best for shallow molds). Since it’s made from 100% food-grade silicone, you can also create edible masterpieces — think cake toppers, chocolate griffins, fondant appliqués, or themed cookies for your next fantasy feast.

Key Features:

• Two mirrored griffin designs in one mold

• 100% food-grade silicone

• Oven safe to 464°F (240°C), freezer safe to -104°F (-75°C), microwave safe

• Captures fine baroque details with precision

• Works with edible and non-edible mediums

• Durable, flexible, and built to inspire for years to come

How to Use:
Apply a thin layer of release agent if necessary, fill with your chosen medium, and let cure. Gently bend to release your casting — no magic spells required. If stubborn, place in the freezer for 30 minutes for an easy pop-out.

Zuri Designs molds are made to last and to make a statement. With proper care, your Baroque Griffins will stand guard over your creative kingdom for many years.

Note: Avoid excessive bending, pulling, or using non-silicone-friendly materials.

Baroque Blooms Zuri Silicone Mold

Individual casting dimensions in attached product images.

Part of our Vintage Dreams Collection, the Baroque Blooms Silicone Mold is a lush celebration of classical florals and ornate scrollwork—designed to elevate both grand furniture pieces and delicate craftwork alike. With a mix of large and small casting elements, this versatile mold lends itself beautifully to everything from drawer fronts and mirror frames to greeting cards, jewelry boxes, and dimensional mixed media art.

Each bloom, leaf, and curve is captured in exquisite detail, allowing you to create richly textured designs using your medium of choice. Whether you're pouring resin for a dramatic wall plaque or pressing air-dry clay into a small embellishment, Baroque Blooms delivers elegance with every impression.

Made from premium, food-grade silicone, this mold is:

• Oven safe up to 464°F (240°C)
• Freezer safe down to -104°F (-75°C)
• Microwave safe
• BPA, PVC, and Phthalate free

It works beautifully with resin, polymer clay, air-dry clay, hot glue, thermoplastic, modeling paste (ideal for shallower designs), wax, soap base, crafting concrete, and more.

⚠️ Important Note: If you plan to use this mold for edible creations such as fondant, chocolate, or candy, do not reuse it after casting with resin, clay, or other non-edible mediums.

How to Use

Apply a fine layer of release agent when needed. Fill the mold with your chosen medium and allow to cure. To remove the casting, gently bend the mold edges—avoid forceful pulling. If removal is difficult, freeze the mold for 30 minutes to make castings pop out cleanly.

Why Zuri

Our molds are meticulously crafted from the highest-quality silicone to ensure heirloom durability and artistic precision. With proper care, your Zuri mold will serve you beautifully for years to come.

Cherry Blossom Set 1 (for furniture artists and large-scale mixed media pieces) Silicone Mold by Zuri Designs Vintage Dreams Collection

Mold Size: 16.14" (41cm) x 11.1" (28.2cm) x 0.32" (0.82cm)

Individual castings vary in size, with the largest  element being approx. 8 inches in length.

Delicate yet striking, Cherry Blossom captures the quiet poetry of petals caught mid-bloom. Every branch in this set—whether curved with budding softness or blooming in full—feels alive with movement, detail, and tenderness.

Set 1 is ideal for furniture artists, wall panels, or larger-scale mixed media creations, where impact meets grace.

Cast them in clay, resin, plaster, or wax—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.

Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Cast them in clay, resin, plaster—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.  Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Perfect for mixed media artists, furniture embellishment, resin casting, journaling, or decorative trim, these designs turn simple frames, boxes, canvases, and books into heirlooms. Whether you cast them in plaster, clay, resin, or wax, the detail holds beautifully and finishes like a dream.

From opulent scrolls to symmetrical floral inlays, these borders don’t just decorate—they define.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherry Blossom Set 2 (for small-scale mixed media projects) Silicone Mold by Zuri Designs Vintage Dreams Collection

Mold Size: 8.46" (21.5cm) x 5.95" (15.1cm) x 0.22" (0.57cm)  Individual castings vary in size.

Delicate yet striking, Cherry Blossom captures the quiet poetry of petals caught mid-bloom. Every branch in this set—whether curved with budding softness or blooming in full—feels alive with movement, detail, and tenderness.

Set 2 is ideal for small-scale mixed media creations, where impact meets grace.

Cast them in clay, resin, plaster—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.  Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Perfect for mixed media artists, furniture embellishment, resin casting, journaling, or decorative trim, these designs turn simple frames, boxes, canvases, and books into heirlooms. Whether you cast them in plaster, clay, resin, or wax, the detail holds beautifully and finishes like a dream.

From opulent scrolls to symmetrical floral inlays, these borders don’t just decorate—they define.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gypsy Queen Silicone Mold by Zuri Designs Vintage Dreams Collection

Casting size: 4.65" (11.8cm) x 5" (12.8cm) x 0.36" (0.93cm)

“She dances as if no one's watching.”  Graceful, untamed, and utterly present, Gypsy Queen is a tribute to the spirit that cannot be caged. Her silhouette flows with quiet defiance—hips swaying to a rhythm only she can hear, arms tracing stories into the air, barefoot and bold. Every curve of her form captures the moment just before movement—a breath held between freedom and fire.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gargoyle Set 2 Silicone Mold by Zuri Designs Vintage Dreams Collection

Casting size: 6" (15.2cm) x 6" (15.2cm) x 0.31" (0.8cm)

Towering at 6 inches tall, Gargoyle Set 2 is a sculptural ode to the watchers—the forgotten sentinels who crouch in silence atop ancient stone, claws curled in vigilance, wings wide with warning. Every curve of this mold speaks of shadow and strength, entwined with florals that soften the menace into something almost mythic.

Perfect for mixed media projects, this piece invites bold hands and brave visions.
It doesn’t demand darkness—it simply honors it.

Whether painted in aged stone or gilded in metallics, this guardian is ready to claim space.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gargoyle Set 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Mirrored gargoyles Approximate Size 

Each Gargoyle Width 5.18" (131.7mm), Height 6" (152.5mm) Depth 0.31" (8mm”)

Central element: Width 2" (52.2mm) Height 2" (51.7mm) Depth 0.31" (8mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Sacred Heart Silicone Mold by Zuri Designs Vintage Dreams Collection

Top Left: Width 2.66" (67.7mm) Height 2.57" (65.5mm) Depth: 0.35" (9mm)

Top right: Width 2.89" (73.4mm) Height: 2.44" (62.1mm) Depth 0.35" (9mm)

Bottom: Width 6.19" (157.3mm) Height 6" (152.3mm) Depth: 0.35" (9mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Music Box Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 4.53" (115mm), Height:  5" (127mm), Depth: 0.35" (9mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherub Rhapsody Set 2 Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 8.35" (212mm), Height:  3" (76.1mm), Depth: 0.3" (7.7mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherub Rhapsody Set 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 18.11" (460mm), Height:  6.5" (165mm), Depth: 0.39" (10mm)

This is a very large and heavy mold design with furniture artistry in mind. We also offer this mold in a smaller size, suitable for mixed media projects. Check out our Cherub Rhapsody Set 2 listing for size details.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Diamond Veil Silicone Mold by Zuri Designs Lace Mat Collection

Size:  Width: 12.2" (31cm), Height:  17.4" (44.2cm), Depth: 0.11" (0.3cm)

Gorgeous Lace Mat with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This lace mat is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This lace mat is made of 100% food grade, FDA-approved silicone. It is therefore suitable for use with edible mediums for candy making, cake decorating, etc.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our Lace Mats: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the lace mat with your medium, use a scraper to remove any excess and allow to cure. Gently bend along the edges of the lace mat to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the lace mat when attempting to remove, making it more difficult to separate them from the lace mat. If that happens, simply place the lace mat in the freezer for about 30 minutes. The casting will then pop right out.

Zuri Designs lace mats are meticulously crafted from the finest silicone available, guaranteeing exceptional durability that transforms them into cherished crafting heirlooms. With proper care, they will serve you reliably for years to come. Please be aware that we cannot accept responsibility for damage caused by excessive bending, pulling, use of non-silicone-friendly mediums, or any other misuse.

Heirloom Cabinet Silicone Mold by Zuri Designs Vintage Dreams Collection

W: 16.6cm (6.53”) H: 20.3cm (8”) D:1.2cm (0.47”)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Baroque Onlays 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Central Element: W 43.8cm (17.25”) H: 15.26cm (6”)

Top right and bottom left medallion: approx. W: 5cm (1.96”) H: 4.9cm (1.93”)

Bottom right onlay: W: 14.4cm (5.67”) H: 3.5cm (1.38”)

Bottom onlay (second from left): W 10.5cm (4.13”) H: 3.95cm (1.55”)

Top long onlay (second from right): W:13.3cm (5.24”) H: 5.2cm (2”)

Top left onlay (first from left): W: 17.1cm (6.73”) H: 4.4cm (1.73”)

Small flowers between 2cm (0.78”) – 2.6cm (1.02”) wide

This is a very large and heavy mold design with furniture artistry in mind. We also offer this mold in a smaller size, suitable for mixed media projects and check out our Baroque Onlays Set 2 listing for the smaller size details.

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free