Paint Couture Glaze

Amber Honey Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Black Chiffon Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Approx. Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Black Walnut Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Champagne Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Copperhead Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Light Brown Sugar Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Raven Black Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Rich Mahogany Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Van Dyke Brown Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Verde Green Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Weathered Wood Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Zinc Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Paint Couture Clear Glazing Base is used for creating your own custom glazes. 

Paint Couture Glaze is a very easy to use product; brush it on and wipe off. A water-based glaze. For use over all Paint Couture as well as other chalk or milk paints. It provides an antique or metallic look very popular for cabinets and furniture. The finish derived from a coat of Glaze enhances your work and there is so little work to apply Glaze compared to adding a coat of wax. Clean up is easy with just soap and water.

Before applying Glaze make sure your Paint Couture painted project has dried at least 4 hours. If using chalk type paints wait at least 2 hours before applying Glaze . If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them. Wipe off any sandpaper dust with a damp cloth and let dry. Apply the glaze with a brush or 1/2″ nap roller. Liberally apply the glaze. Be sure your tools are dry when applying the glaze. Wait a few minutes and gently wipe off excess glaze using a staining pad, foam brush, cheesecloth or lint free cotton rag. For more working time dampen the cheesecloth or staining pad and wring it out well, then remove the glaze.

To use it as a stain: Apply the glaze evenly with a foam brush and do not remove. It can also be applied with a good quality brush and do not remove the glaze. A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried.

If you have to glaze a large area and need more working time: Paint a coat of Flat or Satin Topcoat to act as a barrier coat. Let this coat of topcoat dry 4 hours before applying the glaze.

Clear Glazing Medium can be added to Glaze Couture to extend your working time.

Allow the glaze to dry 24 hours before applying Paint Couture Topcoat. This will provide the best durability.

Clean up is with warm soapy water.

After a minimum of 24 hours you may apply Couture Topcoat as desired for best durability. Follow instructions for the product chosen.

Our glaze dries with to a satin sheen, and does offer protection for your piece so using a topcoat is not needed in most cases. We always recommend a topcoat on cabinetry and table tops.

Sponge Applicator Pads are great for applying Paint Couture Glazes.  Did you know that Paint Couture Glazes double as a Stain?!   These applicators are great for also applying waxes as well!  The outside terry cloth is super soft and the inner sponge is super absorbent.

Sold per pack.  Two pads per pack.

Platinum Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Brocade Gold Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Extender - Paint Couture Paint Additive

Paint Couture Extender is a water based additive formulated for interior and exterior use.  Paint Couture Extender will lengthen the dry time of Paint Couture paint, glazes and topcoats.  Paint Couture Extender is a great additive if you want a longer working time to include reducing brush strokes by mixing it into any of our great water based paints, glazes and topcoats.   Our extender is a great product to use for hot and dry environments. 

You may store and keep your mixed Paint Couture paint, glazes or topcoats once mixed with our extender.  Mixing extender into any of aforementioned items will not deteriorate them.  When reusing a previously mixed product be sure to thoroughly mix the product prior to using. 

Recommended Mix Ratio: 5%
Maximum Mix Ratio: 15%

MIXING DIRECTIONS: Always work in a well ventilated area. Mix 5% by volume if allowed by local regulations to extend the drying time of Paint Couture water based paints, glazes and topcoat products. Stir Extender thoroughly in Paint Couture paints, glazes and topcoats. Test a small area before proceeding once thoroughly mixed.

CLEAN UP: Use Warm Soapy Water

STORAGE: 50-100 Degrees Fahrenheit / 10-38 Degrees Celsius. Keep from Freezing.

LIMITED WARRANTY: Paint Couture products must be tested to your complete satisfaction before using. Paint Couture will not be responsible for color satisfaction, misapplication, nor compatibility with other manufacturers' products. Paint Couture will be responsible only for the cost of our products, and not for cost such as labor, damage, or project replacement. Paint Couture assumes no liability for the improper use of these products.

Paint Couture 3 pack bundle of the same 1oz Glaze can be quickly added to your cart with our Paint Couture Paint Quick Order option for all 1 fl. oz / 30ml paint colors.  

Lime Wash Paint Couture Antiquing Glaze

16oz - Pint

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Sheer Smoke Paint Couture Antiquing Glaze

16oz Pint

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Whitewash Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Cobblestone Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Smoked Walnut Paint Couture Antiquing Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Copper Patina Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.

Regal Bronze Paint Couture Metallic Glaze

Paint Couture Glaze is a water based acrylic glaze specifically formulated for cabinets and furniture.  Paint Couture Glazes are very easy to use:  brush it on and wipe off!  They can also be used as stains.  The glaze provides an antique or metallic look very popular for cabinets and furniture.  The finish derived from a coat of Paint Couture Glaze enhances your work with minimal effort to apply compared to waxing.  Clean up is easy with just soap and water.  Paint Couture glaze can be applied to newly painted pieces without applying a topcoat prior. 

Clean Up: Use warm soapy water.

Coverage: 

2 fl. oz - 5 sq ft
4 fl. oz - 10 sq ft
8 fl. oz - 20 sq ft
16 fl. oz - 40 sq ft

Application & Instructions:

Before applying Paint Couture Glaze make sure your painted piece has dried thoroughly, about four hours depending on thickness of application and humidity.  If using chalk type paints, wait at least two hours before applying Paint Couture Glaze.  If your project shows brush marks, sand lightly with 400 grit sandpaper to remove them.  Wipe off any dust with a damp cloth or tac free cloth and let dry.  Liberally apply the glaze with a chip brush, quality brush like our Paint Couture Brushes or 1/2″ nap roller.  Wait a few minutes and gently wipe off excess glaze using a Paint Couture staining pad, lint free wiping cloth, foam brush, or cheesecloth.  Be careful not to overwork the glaze.  If working on a large piece, work in small sections about 16” x 16” in size. 

For extended working time, add Paint Couture Clear Glazing Base.  If your applicator becomes filled with glaze when removing it from the piece, rinse your applicator and squeeze out any excess water.  Repeat as necessary.  When glazing a large area and need more working time:  Apply a coat of Paint Couture Topcoat to act as a barrier coat.  Ensure the topcoat is dry before applying the glaze.  For best results, it is recommended waiting about four hours before applying the glaze.

To use Paint Couture Glaze as a stain:  Apply the glaze evenly with a Paint Couture brush, foam brush or staining pad, and do not remove the glaze.  A second coat may be applied to deepen the glaze color after the first coat has thoroughly dried. 

It is recommended to allow the glaze to dry 24 hours before applying Paint Couture Topcoat.  This will provide the best durability.  Our glaze dries with to a matte sheen and does offer protection for your piece so using a topcoat is not needed in most cases.  We always recommend applying a topcoat on cabinetry and tabletops.