Paint Couture Topcoat

Paint Couture Topcoat - Dead Flat

Decoupage Medium Matte by Paint Couture is a specially formulated water based medium that is water resistant.  It creates a perfect low luster finish on your decoupage projects.  Discover how perfect Decoupage Medium Matte is for using with your decoupage papers and especially Rice Papers.  This decoupage medium is great for gluing, varnishing and transferring techniques all in one. Use it on paper, cardboard, chipboard, wood, ceramics and so much more.

Sizes: 1 fl. oz, 2 fl. oz, 4 fl. oz and 8 fl. oz

Decoupage Medium Shine by Paint Couture is a specially formulated water based medium that is water resistant.  It creates a perfect medium luster finish on your decoupage projects.  Discover how perfect Decoupage Medium Shine is for using with your decoupage papers and especially Rice Papers.  This decoupage medium is great for gluing, varnishing and transferring techniques all in one. Use it on paper, cardboard, chipboard, wood, ceramics and so much more.

Sizes: 1 fl. oz, 2 fl. oz, 4 fl. oz and 8 fl. oz

Paint Couture Extreme Guard Flat Topcoat is a flexible and extremely durable, low VOC,  water based topcoat designed for furniture, cabinets and other high traffic surfaces.  Paint Couture Extreme Guard Flat Topcoat is water resistant with UV protection built in.  Paint Couture Extreme Guard is formulated for exterior use, however it may be used indoors as well.  Extreme Guard Topcoats can be used on top of Paint Couture Paints, Paint Couture Metallic Paints and Paint Couture Glaze Products.  There are many other products over which Paint Couture Extreme Guard Topcoats may be used, and we strongly suggest you do a test sample prior to starting your actual work. 

Instructions: 
Stir thoroughly before use.  It is important that you do not shake.  If you accidently shake the product, let it sit for 2 hours prior to use.  Be sure project items that have been painted with Paint Couture Paint have dried fully, at least four (4) hours and glazed pieces 24 hours.  Apply Paint Couture Extreme Guard Topcoat with a good quality synthetic brush, a foam brush, a Lambs Wool Applicator or use a sprayer.  It may be lightly sanded after 45 minutes of first coat.  Allow two (2) hours to dry.  If adding a second coat of Paint Couture Extreme Guard Topcoat, lightly sand with 400 grit sandpaper, wipe away any dust residue and then apply the second coat.  Paint Couture Topcoat products are recommended for a more durable finish.

Clean up: Use warm soapy water.

Coverage:
Approximately 20 square feet per half pint (4 fl. oz / 118 ml)
Approximately 40 square feet per half pint (8 fl. oz / 237 ml)
Approximately 80 square feet per pint (16 fl. oz / 473 ml)
Approximately 160 square feet per quart (32 fl. oz / 946 ml)

Caution: Use with adequate ventilation.  Do not take internally.  Close container after each use.  Do not topcoat projects out of the container, but instead pour off what you need.  Avoid contact with eyes and prolonged contact with skin.  Avoid breathing spray mist.  If accidentally swallowed, contact a physician or the local poison control center.  Keep out of reach of children.  Do not freeze.  Use and store between 50°-90°F.  Do not use in direct sunlight.

Extreme Guard Topcoat Gloss

Paint Couture Extreme Guard Gloss Topcoat is a flexible and extremely durable, low VOC,  water based topcoat designed for furniture, cabinets and other high traffic surfaces.  Paint Couture Extreme Guard Gloss Topcoat is water resistant with UV protection built in.  Paint Couture Extreme Guard is formulated for exterior use, however it may be used indoors as well.  Extreme Guard Topcoats can be used on top of Paint Couture Paints, Paint Couture Metallic Paints and Paint Couture Glaze Products.  There are many other products over which Paint Couture Extreme Guard Topcoats may be used, and we strongly suggest you do a test sample prior to starting your actual work. 

Instructions: 
Stir thoroughly before use.  It is important that you do not shake.  If you accidently shake the product, let it sit for 2 hours prior to use.  Be sure project items that have been painted with Paint Couture Paint have dried fully, at least four (4) hours and glazed pieces 24 hours.  Apply Paint Couture Extreme Guard Topcoat with a good quality synthetic brush, a foam brush, a Lambs Wool Applicator or use a sprayer.  It may be lightly sanded after 45 minutes of first coat.  Allow two (2) hours to dry.  If adding a second coat of Paint Couture Extreme Guard Topcoat, lightly sand with 400 grit sandpaper, wipe away any dust residue and then apply the second coat.  Paint Couture Topcoat products are recommended for a more durable finish.

Clean up: Use warm soapy water.

Coverage:
Approximately 20 square feet per half pint (4 fl. oz / 118 ml)
Approximately 40 square feet per half pint (8 fl. oz / 237 ml)
Approximately 80 square feet per pint (16 fl. oz / 473 ml)
Approximately 160 square feet per quart (32 fl. oz / 946 ml)

Caution: Use with adequate ventilation.  Do not take internally.  Close container after each use.  Do not topcoat projects out of the container, but instead pour off what you need.  Avoid contact with eyes and prolonged contact with skin.  Avoid breathing spray mist.  If accidentally swallowed, contact a physician or the local poison control center.  Keep out of reach of children.  Do not freeze.  Use and store between 50°-90°F.  Do not use in direct sunlight.

Extreme Guard Topcoat Satin

Paint Couture Extreme Guard Satin Topcoat is a flexible and extremely durable, low VOC,  water based topcoat designed for furniture, cabinets and other high traffic surfaces.  Paint Couture Extreme Guard Satin Topcoat is water resistant with UV protection built in.  Paint Couture Extreme Guard is formulated for exterior use, however it may be used indoors as well.  Extreme Guard Topcoats can be used on top of Paint Couture Paints, Paint Couture Metallic Paints and Paint Couture Glaze Products.  There are many other products over which Paint Couture Extreme Guard Topcoats may be used, and we strongly suggest you do a test sample prior to starting your actual work. 

Instructions: 
Stir thoroughly before use.  It is important that you do not shake.  If you accidently shake the product, let it sit for 2 hours prior to use.  Be sure project items that have been painted with Paint Couture Paint have dried fully, at least four (4) hours and glazed pieces 24 hours.  Apply Paint Couture Extreme Guard Topcoat with a good quality synthetic brush, a foam brush, a Lambs Wool Applicator or use a sprayer.  It may be lightly sanded after 45 minutes of first coat.  Allow two (2) hours to dry.  If adding a second coat of Paint Couture Extreme Guard Topcoat, lightly sand with 400 grit sandpaper, wipe away any dust residue and then apply the second coat.  Paint Couture Topcoat products are recommended for a more durable finish.

Clean up: Use warm soapy water.

Coverage:
Approximately 20 square feet per half pint (4 fl. oz / 118 ml)
Approximately 40 square feet per half pint (8 fl. oz / 237 ml)
Approximately 80 square feet per pint (16 fl. oz / 473 ml)
Approximately 160 square feet per quart (32 fl. oz / 946 ml)

Caution: Use with adequate ventilation.  Do not take internally.  Close container after each use.  Do not topcoat projects out of the container, but instead pour off what you need.  Avoid contact with eyes and prolonged contact with skin.  Avoid breathing spray mist.  If accidentally swallowed, contact a physician or the local poison control center.  Keep out of reach of children.  Do not freeze.  Use and store between 50°-90°F.  Do not use in direct sunlight.

Extreme Guard Topcoat - Semi-Gloss

Paint Couture Extreme Guard Semi-Gloss Topcoat is a flexible and extremely durable, low VOC,  water based topcoat designed for furniture, cabinets and other high traffic surfaces.  Paint Couture Extreme Guard Semi-Gloss Topcoat is water resistant with UV protection built in.  Paint Couture Extreme Guard is formulated for exterior use, however it may be used indoors as well.  Extreme Guard Topcoats can be used on top of Paint Couture Paints, Paint Couture Metallic Paints and Paint Couture Glaze Products.  There are many other products over which Paint Couture Extreme Guard Topcoats may be used, and we strongly suggest you do a test sample prior to starting your actual work. 

Instructions: 
Stir thoroughly before use.  It is important that you do not shake.  If you accidently shake the product, let it sit for 2 hours prior to use.  Be sure project items that have been painted with Paint Couture Paint have dried fully, at least four (4) hours and glazed pieces 24 hours.  Apply Paint Couture Extreme Guard Topcoat with a good quality synthetic brush, a foam brush, a Lambs Wool Applicator or use a sprayer.  It may be lightly sanded after 45 minutes of first coat.  Allow two (2) hours to dry.  If adding a second coat of Paint Couture Extreme Guard Topcoat, lightly sand with 400 grit sandpaper, wipe away any dust residue and then apply the second coat.  Paint Couture Topcoat products are recommended for a more durable finish.

Clean up: Use warm soapy water.

Coverage:
Approximately 20 square feet per half pint (4 fl. oz / 118 ml)
Approximately 40 square feet per half pint (8 fl. oz / 237 ml)
Approximately 80 square feet per pint (16 fl. oz / 473 ml)
Approximately 160 square feet per quart (32 fl. oz / 946 ml)

Caution: Use with adequate ventilation.  Do not take internally.  Close container after each use.  Do not topcoat projects out of the container, but instead pour off what you need.  Avoid contact with eyes and prolonged contact with skin.  Avoid breathing spray mist.  If accidentally swallowed, contact a physician or the local poison control center.  Keep out of reach of children.  Do not freeze.  Use and store between 50°-90°F.  Do not use in direct sunlight.

Paint Couture Topcoat - Flat

Hemp Oil Paint Couture 

Note: Restores and Rejuvenates.  use to restore old and dry wood, cabinetry, furniture.

Let your imagination loose and get creative by using Paint Couture Pouring Resin to create high gloss pieces of art on furniture, canvas or wood.

Our Pouring Resin is beautifully formulated to flow and level by itself and create a thick high gloss finish.  Creators can let loose their imagination and create beautiful pieces of art on wood or canvas or on furniture top surfaces.  The best part of our Pouring Resin is that it works well with all of our Paint Couture Acrylic Mineral Paints, Lux Metallics, German Glass Glitters, Perfect Pigments and Pure Concentrated Pigments.  To use or Pouring Resin with Paint Couture Paint or Lux Metallics simply add a few drops and then stir after stirring simply start pouring and let your imagination go wild.  Once done pouring tilt your surface area around or use a silicone spreading tool create a desired look. 

ADDITIONAL WAYS TO USE POURING RESIN

You may use the Pouring Resin as a topcoat.  If you use as a topcoat you will get a very high gloss.  You may use as a very thick decoupage pouring medium.  If using in silicone molds you will not want to go over 1/16" in depth as shrinkage will occur and instead pour in thin layers.  When using a fondant mold our Pouring Resin will achieve great results.   You can add Paint Couture Glaze to create a toned stain look or simply add Lux Metallics to create a pearlescent look.
 

HOW TO USE POURING RESIN FOR PAINT POURS

Stir Pouring Resin before using.  For best results use on a flat horizontal surface as our pouring resin is self-levelling.  Use a silicone pointed spreading tool to create decorative designs and accents.  Do not use a porous material to interact with your project piece once poured such as a paint stick, paint brush as this will have an adverse effect on your paint pour project.
 
Add color to your Pouring Resin by using Paint Couture Perfect Pigments or Paint Couture Pure Concentrated Pigments to achieve a lustrous or vibrant looks.  Adding German Glass Glitter will add some brilliant sparkle due to the reflective natures of real glass.  You can also use any of our wonderful Paint Couture Acrylic Mineral Paint, Lux Metallics, Sheer Metallics or Heavy Metallics to create a one of a kind amazing piece.
 
Please note that you do not want to add more than ten percent of paint to the Pouring Resin as this will have an adverse impact on the flowing ability of the Pouring Resin.  The less paint used the better which is why we suggest Pure Concentrated Pigments or our Perfect Pigment products.
 
If you get bubbles tap the surface to help the bubbles settles.  You may also use cool air to help the Pouring Resin flow along with tilting surface area in different directions if possible.
 

COVERAGE 

6 square feet per 4oz container which will do several small canvas pieces or a night stand.
12 square feet per 8oz container which will do a pair of night stands and dresser.
25 square feet per 16oz container is great for a dinning table project and so much more.
 

BENEFITS

Can be used on paint canvas, shadow wood boxes,  furniture top, or any flat surface that Paint Couture products adheres to.  Once fully dried it is a super durable, high gloss finish. Pour in thin layers to create a dimensional look.  You can paint between layers or pour paint or use texture products over an existing layer to create a multi-dimensional look.  

• Dries to a strong high gloss finish

• Simple and easy to use

• Is an incredibly strong topcoat

• Non-toxic

Application Method: Pour on
Indoor & Outdoor Use: Yes
Recoat & Dry Time: 2 to 8 hours
Requires Sealant: No
Clean Up: Warm soapy water
Coverage: 4oz - 6 sq. ft. |  8oz - 12 sq. ft. 16oz - 25 sq. ft.  
Sheen: High Gloss 
Non-Recommended Surfaces: Not for oil or wax surfaces.
Can Be Painted Over: Yes - Great for creating dimensional effects.
Cure Time: 24 Days
Project Care and Maintenance: Luke warm soap and water.

Paint Couture Topcoat - Satin

Paint Couture Topcoat - Semi-Gloss