Baroque Blooms Zuri Silicone Mold

Individual casting dimensions in attached product images.

Part of our Vintage Dreams Collection, the Baroque Blooms Silicone Mold is a lush celebration of classical florals and ornate scrollwork—designed to elevate both grand furniture pieces and delicate craftwork alike. With a mix of large and small casting elements, this versatile mold lends itself beautifully to everything from drawer fronts and mirror frames to greeting cards, jewelry boxes, and dimensional mixed media art.

Each bloom, leaf, and curve is captured in exquisite detail, allowing you to create richly textured designs using your medium of choice. Whether you're pouring resin for a dramatic wall plaque or pressing air-dry clay into a small embellishment, Baroque Blooms delivers elegance with every impression.

Made from premium, food-grade silicone, this mold is:

• Oven safe up to 464°F (240°C)
• Freezer safe down to -104°F (-75°C)
• Microwave safe
• BPA, PVC, and Phthalate free

It works beautifully with resin, polymer clay, air-dry clay, hot glue, thermoplastic, modeling paste (ideal for shallower designs), wax, soap base, crafting concrete, and more.

⚠️ Important Note: If you plan to use this mold for edible creations such as fondant, chocolate, or candy, do not reuse it after casting with resin, clay, or other non-edible mediums.

How to Use

Apply a fine layer of release agent when needed. Fill the mold with your chosen medium and allow to cure. To remove the casting, gently bend the mold edges—avoid forceful pulling. If removal is difficult, freeze the mold for 30 minutes to make castings pop out cleanly.

Why Zuri

Our molds are meticulously crafted from the highest-quality silicone to ensure heirloom durability and artistic precision. With proper care, your Zuri mold will serve you beautifully for years to come.

Cherry Blossom Set 1 (for furniture artists and large-scale mixed media pieces) Silicone Mold by Zuri Designs Vintage Dreams Collection

Mold Size: 16.14" (41cm) x 11.1" (28.2cm) x 0.32" (0.82cm)

Individual castings vary in size, with the largest  element being approx. 8 inches in length.

Delicate yet striking, Cherry Blossom captures the quiet poetry of petals caught mid-bloom. Every branch in this set—whether curved with budding softness or blooming in full—feels alive with movement, detail, and tenderness.

Set 1 is ideal for furniture artists, wall panels, or larger-scale mixed media creations, where impact meets grace.

Cast them in clay, resin, plaster, or wax—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.

Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Cast them in clay, resin, plaster—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.  Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Perfect for mixed media artists, furniture embellishment, resin casting, journaling, or decorative trim, these designs turn simple frames, boxes, canvases, and books into heirlooms. Whether you cast them in plaster, clay, resin, or wax, the detail holds beautifully and finishes like a dream.

From opulent scrolls to symmetrical floral inlays, these borders don’t just decorate—they define.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherry Blossom Set 2 (for small-scale mixed media projects) Silicone Mold by Zuri Designs Vintage Dreams Collection

Mold Size: 8.46" (21.5cm) x 5.95" (15.1cm) x 0.22" (0.57cm)  Individual castings vary in size.

Delicate yet striking, Cherry Blossom captures the quiet poetry of petals caught mid-bloom. Every branch in this set—whether curved with budding softness or blooming in full—feels alive with movement, detail, and tenderness.

Set 2 is ideal for small-scale mixed media creations, where impact meets grace.

Cast them in clay, resin, plaster—paint them with pastels or metallics. However you bring them to life, they’ll carry the same message: Even fleeting beauty can leave a lasting mark.  Whether used for a romantic vignette or a timeless heirloom, the magic of these blossoms never fade.

Perfect for mixed media artists, furniture embellishment, resin casting, journaling, or decorative trim, these designs turn simple frames, boxes, canvases, and books into heirlooms. Whether you cast them in plaster, clay, resin, or wax, the detail holds beautifully and finishes like a dream.

From opulent scrolls to symmetrical floral inlays, these borders don’t just decorate—they define.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Baroque Borders Silicone Mold by Zuri Designs Vintage Dreams Collection

Casting sizes:

Top border: 12.15" (30.85cm) x 1.43" (3.65cm) x 0.23" (0.6cm)

Middle border: 12.15" (30.85cm) x 1.39" (3.53cm) x 0.23" (0.6cm)

“Because even edges deserve to be extraordinary.”  Intricate, regal, and rich with movement, Baroque Borders brings classical elegance to any creative project. With three distinct border styles—each one carved in high relief and draped in swirling flourishes—this mold evokes the timeless charm of 18th-century ornamentation without ever feeling dated.

Perfect for mixed media artists, furniture embellishment, resin casting, journaling, or decorative trim, these designs turn simple frames, boxes, canvases, and books into heirlooms. Whether you cast them in plaster, clay, resin, or wax, the detail holds beautifully and finishes like a dream.

From opulent scrolls to symmetrical floral inlays, these borders don’t just decorate—they define.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gypsy Queen Silicone Mold by Zuri Designs Vintage Dreams Collection

Casting size: 4.65" (11.8cm) x 5" (12.8cm) x 0.36" (0.93cm)

“She dances as if no one's watching.”  Graceful, untamed, and utterly present, Gypsy Queen is a tribute to the spirit that cannot be caged. Her silhouette flows with quiet defiance—hips swaying to a rhythm only she can hear, arms tracing stories into the air, barefoot and bold. Every curve of her form captures the moment just before movement—a breath held between freedom and fire.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gargoyle Set 2 Silicone Mold by Zuri Designs Vintage Dreams Collection

Casting size: 6" (15.2cm) x 6" (15.2cm) x 0.31" (0.8cm)

Towering at 6 inches tall, Gargoyle Set 2 is a sculptural ode to the watchers—the forgotten sentinels who crouch in silence atop ancient stone, claws curled in vigilance, wings wide with warning. Every curve of this mold speaks of shadow and strength, entwined with florals that soften the menace into something almost mythic.

Perfect for mixed media projects, this piece invites bold hands and brave visions.
It doesn’t demand darkness—it simply honors it.

Whether painted in aged stone or gilded in metallics, this guardian is ready to claim space.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Gargoyle Set 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Mirrored gargoyles Approximate Size 

Each Gargoyle Width 5.18" (131.7mm), Height 6" (152.5mm) Depth 0.31" (8mm”)

Central element: Width 2" (52.2mm) Height 2" (51.7mm) Depth 0.31" (8mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Sacred Heart Silicone Mold by Zuri Designs Vintage Dreams Collection

Top Left: Width 2.66" (67.7mm) Height 2.57" (65.5mm) Depth: 0.35" (9mm)

Top right: Width 2.89" (73.4mm) Height: 2.44" (62.1mm) Depth 0.35" (9mm)

Bottom: Width 6.19" (157.3mm) Height 6" (152.3mm) Depth: 0.35" (9mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Music Box Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 4.53" (115mm), Height:  5" (127mm), Depth: 0.35" (9mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherub Rhapsody Set 2 Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 8.35" (212mm), Height:  3" (76.1mm), Depth: 0.3" (7.7mm)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Cherub Rhapsody Set 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Size:  Width: 18.11" (460mm), Height:  6.5" (165mm), Depth: 0.39" (10mm)

This is a very large and heavy mold design with furniture artistry in mind. We also offer this mold in a smaller size, suitable for mixed media projects. Check out our Cherub Rhapsody Set 2 listing for size details.

This mold is oven safe up to 464 F (240 C), freezer safe to -104 F (-75 C) and can be safely used in the microwave. It is BPA, PVC and Phthalate free.

This mold is made of 100% food grade silicone. It is therefore suitable for use with edible mediums for candy and cookie making, cake decorating, etc. You can also use it to make ice shapes by filling the cavities with water and placing the mold in the freezer.

For instructions on how to use the above listed mediums and the use of release agents, please refer to their respective manufacturer’s instructions.

How to use our molds: When appropriate, apply a release agent to the surface of the mold in a fine, even layer. Fill the mold with your medium and allow to cure. Gently bend along the edges of the mold to release the casting. Remove the casting with care, without any forceful pulling or excessive bending. Certain mediums with higher water content and/or elasticity may tend to stretch with the mold when attempting to remove, making it more difficult to separate them from the mold. If that happens, simply place the mold in the freezer for about 30 minutes. The casting will then pop right out.

Heirloom Cabinet Silicone Mold by Zuri Designs Vintage Dreams Collection

W: 16.6cm (6.53”) H: 20.3cm (8”) D:1.2cm (0.47”)

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Baroque Onlays 1 Silicone Mold by Zuri Designs Vintage Dreams Collection

Central Element: W 43.8cm (17.25”) H: 15.26cm (6”)

Top right and bottom left medallion: approx. W: 5cm (1.96”) H: 4.9cm (1.93”)

Bottom right onlay: W: 14.4cm (5.67”) H: 3.5cm (1.38”)

Bottom onlay (second from left): W 10.5cm (4.13”) H: 3.95cm (1.55”)

Top long onlay (second from right): W:13.3cm (5.24”) H: 5.2cm (2”)

Top left onlay (first from left): W: 17.1cm (6.73”) H: 4.4cm (1.73”)

Small flowers between 2cm (0.78”) – 2.6cm (1.02”) wide

This is a very large and heavy mold design with furniture artistry in mind. We also offer this mold in a smaller size, suitable for mixed media projects and check out our Baroque Onlays Set 2 listing for the smaller size details.

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Baroque Onlays 2 Silicone Mold by Zuri Designs Vintage Dreams Collection

Central Element: W 17.7cm (6.96”) H: 6.1cm (2.4”)

Top right and bottom left medallion: approx. W: 2cm (0.78”) H: 2cm (0.78”)

Bottom right onlay: W: 5.8cm (2.28”) H: 1.4cm (0.55”)

Bottom onlay (second from left): W 4.2cm (1.65”) H: 1.6cm (0.63”)

Top long onlay (second from right): W:5.4cm (2.12”) H: 2.1cm (0.82”)

Top left onlay (first from left): W: 7cm (2.75”) H: 1.8cm (0.7”)

Small flowers between 1cm (0.39”) – 1.3cm (0.51”) wide

This is a mold that we created with mixed media art in mind. We also offer this mold in a much larger size, suitable for furniture projects in the Baroque Onlays Set 1.

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Baroque Lions Silicone Mold by Zuri Designs Vintage Dreams Collection

Entire Mold Height:  6.93", Width 16.9" , depth 0.44" 

Gorgeous mold with stunning elements, ideal for mixed media art, greeting cards, furniture decorating, wall plaques, scrapbooking, home decor and much more. It can be used with a variety of mediums such as polymer and air-dry clay, resin, hot glue, thermoplastic, crafting concrete, modelling paste (best for shallow molds), just to name a few. Works well with candle and soap making mediums.

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Cherub Twins silicone mold by Zuri Designs Vintage Dreams Collection

Approximate Mold Dimensions:

Left cherub: W: 8.26cm (3.25″) H: 8.8cm (3.5″) x D: 0.8cm (0.31”)

Right cherub: W: 9.47cm (3.73″) H: 8.9cm (3.5″) x D: 0.8cm (0.31”)

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Baroque Ornaments Set 1 silicone mold by Zuri Designs Vintage Dreams Collection

Approximate Mold Dimensions:

Top ornament: W: 15.2cm (6″) x H: 7.2cm (2.83″)

Middle ornaments (each): W: 3.82cm (1.5″) x H: 2.7cm (1.06″)

Bottom ornament: W: 11.55cm (4.55″) x H: 7.62 (3″)

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Celestial Guardian silicone mold by Zuri Designs Vintage Dreams Collection

Approximate Mold Dimensions:

Large casting H: 12.39cm (4.87”) W: 9.58cm (3.77”) D:0.8cm (0.31”)

Small castings H: 6.7cm (2.63”) W: 5.18cm (2.03”) D:0.8cm (0.31”)

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Cameo Charms silicone mold by Zuri Designs Vintage Dreams Collection

Approximate Mold Dimensions:

Left Cameo: W: 6.82cm  (2.68″) H: 7.6cm (3″) D: 0.7cm (0.27″)

Middle Cameo: W: 7.51cm (2.96″) H: 7.6cm (3″) D: 0.7cm (0.27″)

Right Cameo: W: 7.94cm  (3.13″) H: 7.6cm (3″) D: 0.7cm (0.27″)

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Vintage Perfume Bottles silicone mold by Zuri Designs
Vintage Dreams Collection

Approximate Mold Size: 
6.96 × 8.11 × 0.36 in

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Square Frame silicone mold by Zuri Designs
Vintage Dreams Collection

Approximate Mold size: 
5.78 × 5.7 × 0.36 in

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe.  Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free

Angels and Frames silicone mold by Zuri Designs
Vintage Dreams Collection

Approximate Mold Size: 
6.3 × 4.3 × 0.31 in

This mold can be used with clay such as paper clay or polymer clay, resin, as well as with food decoration mediums such as chocolate or fondant. When using resin with this mold, we recommend that you apply a release agent first, for example a thin layer of cooking oil spray. When using polymer or air-dry clay with this mold, we recommend that you apply a fine layer of cornstarch, talcum powder or water on the mold before filling it with clay.

Heat resistant, they can be placed in the oven at temperatures up to 464F. They are also microwave, refrigerator and freezer safe. Food safe silicone mold perfect for food decoration and fondant.

BPA, PVC and Phthalate free